Apartment Fire Cleanup in NEWPORT COAST, California

Fast soot, smoke, and water removal for Newport Coast apartments

Apartment Fire Cleanup in NEWPORT COAST, California starts with a call and a crew at your door. We handle soot removal, smoke odor, and water left behind by firefighting, then rebuild what the flames charred. Whether you rent in Ocean Ridge or own a unit near Newport Coast Drive, we document everything for your insurance claim and get you back inside.

Firefighter operating equipment outside apartment buildings in Wrocław, Poland.

What Apartment Fire Cleanup in NEWPORT COAST, California Involves

Apartment Fire Cleanup in NEWPORT COAST, California is the full removal of soot, smoke residue, charred material, and firefighting water from a unit and the shared spaces around it. We start with a walkthrough using a thermal imaging camera and moisture meter to find hidden fire damage behind drywall and water trapped under flooring. Then we HEPA vacuum every surface, wipe soot from walls and cabinets, run air scrubbers and hydroxyl generators, and seal the unit so smoke odor does not migrate into neighboring apartments.

In a Newport Coast building, one kitchen fire can push smoke through the HVAC system into three or four units on the same stack. That is why we treat apartment fire damage restoration NEWPORT COAST California as a building-wide job, not a single-room job. We check shared corridors, stairwells, and attic spaces, and we coordinate with property managers so tenants in Ocean Ridge and Pacific Ridge know when it is safe to return.

Why Newport Coast Residents Call Us First

Why Newport Coast Residents Call Us First

A fire in an apartment is a race against time. Soot etches glass and metal within hours, smoke odor sets into drywall and insulation within days, and firefighting water can feed mold in under 48 hours. Here is what you get when you call us.

Rapid 24/7 Response

We answer the phone around the clock and dispatch a crew to your Newport Coast address, day or night. Most units get a technician on site within 60 to 90 minutes of your call, which is the window where soot is still easy to wipe and smoke odor has not yet bonded to paint and drywall.

Insurance Documentation

We photograph every affected room, log moisture readings, and write a line-item scope your adjuster can process. That paperwork is the difference between a claim that moves in two weeks and one that stalls for two months, especially when a landlord and a renter are both filing.

Odor Gone, Not Masked

Charcoal activated filters, HEPA filters, and hydroxyl generators break down smoke particles instead of covering them with perfume. We do not call a job done until a walkthrough at the door, the hallway, and inside closets confirms no lingering smoke odor.

Structural Repair Included

Once cleanup is finished, our team replaces charred drywall, insulation, lumber, and trim, then primes and paints with a smoke sealant base coat. You get one crew from soot removal through final paint, so nothing falls through the gap between the cleaner and the contractor.

How Our Apartment Fire Cleanup Process Works

Every job follows the same five steps, whether the fire started in a kitchen, a bedroom, or an electrical panel. Here is exactly what happens from the moment you call until the day you move back in.

1

Emergency Call

You call (833) 929-6186 and describe the unit, the fire, and whether the building is still standing. We ask about the address, the floor, and whether the fire department has already cleared the scene. Within minutes we have a crew assigned and heading to your Newport Coast building.

2

Damage Assessment

On arrival, we walk the unit with a thermal imaging camera and moisture meter to map hidden fire damage behind drywall and water damage from firefighting. We check the attic, the HVAC closet, and shared walls. This assessment takes 45 to 90 minutes and produces the scope your insurance claim is built on.

3

Soot and Water Removal

We HEPA vacuum every surface, then wipe soot residue from walls, ceilings, cabinets, and fixtures with dry sponges and chemical sponges. Standing water gets extracted, and we set up air scrubbers and negative air machines to pull smoke particles out of the air while we work.

4

Odor Treatment

Hydroxyl generators and ozone generators run in the sealed unit to break down smoke odor at the molecular level. We replace HVAC filters with charcoal activated filters and clean ductwork so the smell does not return the first time the heat kicks on. This stage runs 24 to 72 hours depending on severity.

5

Repair and Walkthrough

We replace charred drywall, insulation, and lumber, then prime and paint with a smoke sealant base coat. Before we pack up, you walk the unit with us room by room. If anything still smells like smoke or looks unfinished, we fix it before we leave.

Trained for Fire and Smoke Restoration

Our technicians hold IICRC Fire and Smoke Restoration Technician (FSRT) and IICRC Water Restoration Technician (WRT) credentials, which means they are trained on both the fire side and the water side of the same job. We are an EPA Lead-Safe Certified Firm, which matters in older Newport Coast buildings where paint may predate 1978. Every crew carries OSHA 10-Hour Construction Safety training, and we work under a California Contractors State License Board (CSLB) license. We also hold California Department of Public Health (CDPH) Mold Certification, because firefighting water left in a wall for 48 hours grows mold fast.

  • IICRC FSRT certification for smoke and soot remediation on every crew
  • IICRC WRT and ASD training for the water damage firefighting leaves behind
  • EPA Lead-Safe Certified Firm for pre-1978 paint in older buildings
  • CDPH Mold Certification for water-damaged drywall and insulation
  • OSHA 10-Hour Construction Safety training on every technician
Trained for Fire and Smoke Restoration

Why Choose Our Apartment Fire Cleanup in NEWPORT COAST

We are a local crew, not a franchise call center. When you call, you get a technician who knows Newport Coast buildings, not a dispatcher reading a script. Here is what sets our apartment fire cleanup services NEWPORT COAST apart.

We Know These Buildings

Newport Coast apartments sit in multi-story buildings with shared HVAC, shared walls, and shared attics. We know how smoke travels through those systems, and we check the units above, below, and beside yours before we call the job done. That is how we keep the smell from coming back.

One Crew, Start to Finish

We handle soot removal, water extraction, odor treatment, drywall replacement, and paint. You do not have to coordinate three contractors while living in a hotel. One call, one scope, one crew on site until the unit is ready to move back into.

We Work With Property Managers

If you rent, your landlord and your renter's insurance both have a say. We document the unit before, during, and after cleanup, and we send the same report to every party. That keeps a tenant fire damage cleanup from turning into a dispute between landlord and renter.

Affordable Apartment Fire Cleanup NEWPORT COAST Near Me

We price by the scope, not by the hour, and we tell you the number before we start. Most single-unit cleanups land between $2,800 and $12,000 depending on how far the smoke traveled. You get a written scope, and the price does not move unless the damage does.

What Our Apartment Fire Cleanup Includes

Every apartment fire cleanup in NEWPORT COAST, California starts with a full assessment and ends with a walkthrough you sign off on. The inclusions below are part of the standard scope. If your unit needs something beyond this, we tell you before we start and price it separately, so there are no surprises on the invoice.

What's Included

Full Damage Assessment

We walk the unit with a thermal imaging camera and moisture meter to map hidden fire damage behind drywall and water damage from firefighting. You get photos, moisture readings, and a written scope that your insurance adjuster can process without a second visit.

Soot and Residue Removal

We HEPA vacuum every surface, then wipe soot from walls, ceilings, cabinets, and fixtures with dry sponges and chemical sponges. We clean light fixtures, window tracks, and door frames, which are the spots most crews skip and where smoke odor lingers longest.

Water Extraction and Drying

Firefighting leaves standing water in the unit, and it wicks into drywall, subfloor, and baseboards. We extract the water, set air movers and dehumidifiers, and monitor moisture daily until the structure reads dry. That prevents mold from taking hold in the days after the fire.

Odor Treatment

We seal the unit and run hydroxyl generators and ozone generators to break down smoke odor at the molecular level. We replace HVAC filters with charcoal activated filters and clean the ductwork so the smell does not return the first time the heat comes on in your building.

Debris Removal

Charred furniture, burned drywall, and ruined personal property all have to leave the unit before repairs can start. We haul it out, sort salvageable items from what is beyond saving, and dispose of everything according to California waste rules.

Structural Repair and Paint

We replace charred drywall, insulation, lumber, and trim, then prime and paint with a smoke sealant base coat. The repaired wall gets matched to the rest of the unit, so you are not left with a patch that looks like a patch.

Problems We Solve After an Apartment Fire

Most apartment fires leave behind more than char. Smoke odor, hidden water damage, and mold are the problems that show up after the fire trucks leave. Here is what we fix, and why it matters if you are searching for emergency apartment fire cleanup near me NEWPORT COAST.

Problem

Smoke odor that keeps coming back

Smoke particles bond to drywall, insulation, and fabric, then release again when humidity rises. A unit that smells fine in the morning can smell like a campfire by evening, and tenants refuse to move back in.

Solution

We run hydroxyl generators and ozone generators in the sealed unit, replace HVAC filters with charcoal activated filters, and clean the ductwork. We verify with a walkthrough at the door, the hallway, and inside closets before we call the job done.

Problem

Hidden fire damage behind drywall

Electrical fires and attic fires burn inside walls and ceilings where you cannot see them. If the cavity is not opened and cleaned, charred lumber keeps off-gassing smoke odor and the damage spreads.

Solution

We use a thermal imaging camera and a moisture meter to find hot spots and wet cavities, then open the wall with a drywall saw or reciprocating saw, clean the cavity, and repair it. Nothing stays hidden behind a fresh coat of paint.

Problem

Water damage from firefighting

A fire that is put out in 20 minutes can leave hundreds of gallons of water in the unit. That water wicks into drywall, subfloor, and baseboards, and mold can start growing within 48 hours.

Solution

We extract standing water, set air movers and dehumidifiers, and monitor moisture daily until the structure reads dry. We hold CDPH Mold Certification, so we know what to look for in the days after the water is gone.

Problem

Smoke contamination in the HVAC system

In a multi-story Newport Coast building, smoke gets pulled into the shared HVAC system and pushed into units that were never on fire. Those neighbors end up with odor and soot on their belongings.

Solution

We check the HVAC closet and ductwork as part of every assessment, replace filters, and clean the ducts. We also check the units above, below, and beside yours so the smoke does not come back through the shared system.

When to Call for Apartment Fire Cleanup

1

A kitchen fire in a Pelican Hill unit that the fire department put out in 15 minutes but left smoke through the whole floor.

Solution:

We seal the unit, HEPA vacuum every surface, degrease the cabinets and range hood, and run air scrubbers and hydroxyl generators for 48 hours. We check the shared corridor and the units on either side for smoke travel.

Outcome:

The unit passes a smell test at the door and in the closets, and the neighbors do not file their own claims because the smoke never settled in their apartments.

2

An electrical fire inside a wall in an Ocean Ridge apartment that charred the wiring run and left the wall hot to the touch.

Solution:

We use a thermal imaging camera to map the charred run, open the wall with a drywall saw, clean the cavity, and replace the burned lumber and insulation. Then we repair the drywall and paint with a smoke sealant base coat.

Outcome:

The wall is rebuilt and painted to match, the smoke odor is gone, and the unit passes inspection so the tenant can move back in.

3

A bedroom fire in a Newport Coast Drive unit that soaked the mattress, bedding, and closet contents in smoke residue.

Solution:

We remove the soft goods that cannot be saved, treat the room with hydroxyl generators, and clean the closet and dresser contents that can be restored. We document everything for the renter's insurance claim.

Outcome:

The tenant gets a clean, odor-free bedroom back, and the insurance claim covers the personal property that had to be replaced.

4

An attic fire in a Crystal Cove building that spread through insulation and threatened the shared roof deck.

Solution:

We remove burned insulation, treat the charred lumber, and check the shared attic space for smoldering material. We coordinate with the property manager so all affected units are assessed on the same day.

Outcome:

The fire does not reignite in a neighboring unit, and the building gets a single scope that covers every affected apartment.

Tools and Methods We Use

Tools & Equipment

Thermal imaging camera

Finds hidden fire damage behind drywall and hot spots in electrical runs that the eye cannot see. It is how we map a fire that burned inside a wall before we open anything up.

Moisture meter

Reads water content in drywall, subfloor, and baseboards after firefighting. We use it to set drying targets and to confirm the structure is dry before we close up the walls.

Air scrubber and negative air machine

Pulls smoke particles out of the air and keeps them from settling on clean surfaces. We run them continuously while we work so soot does not re-contaminate rooms we have already cleaned.

Hydroxyl generator and ozone generator

Breaks down smoke odor at the molecular level inside a sealed unit. Hydroxyl generators run safely in occupied buildings, while ozone generators run in unoccupied units and require a clearance period afterward.

HEPA vacuum

Captures fine soot particles that a shop vacuum would blow back into the air. We vacuum every surface before we wipe, because wiping dry soot just smears it deeper into the drywall.

Dri-Eaz and Phoenix Restoration Equipment dehumidifiers

Pulls moisture out of the air and the structure after firefighting water is extracted. These are the same units the national restoration brands use on water damage jobs.

Drywall saw and reciprocating saw

Opens walls and ceilings to reach charred lumber and wet cavities. We cut clean openings so the repair patch is small and the finished wall matches the rest of the unit.

Methods

IICRC FSRT standards

Our technicians follow the IICRC Fire and Smoke Restoration Technician standard for soot removal, odor treatment, and surface cleaning. That standard is what insurance adjusters expect to see in a scope, and it is why our documentation holds up on a claim.

IICRC WRT and ASD drying

Firefighting water is treated with the same IICRC Water Restoration Technician and Applied Structural Drying methods we use on flood jobs. We set drying targets, monitor moisture daily, and do not close up a wall until the cavity reads dry.

EPA Lead-Safe work practices

In older Newport Coast buildings, paint may predate 1978. As an EPA Lead-Safe Certified Firm, we contain the work area and follow lead-safe practices when we open walls and remove painted material.

CDPH mold protocols

Water left in a wall for 48 hours grows mold. We hold California Department of Public Health (CDPH) Mold Certification, and we treat water-damaged drywall and insulation before we rebuild, so mold does not come back behind the new wall.

How Apartment Fire Cleanup Runs in Newport Coast

Newport Coast is built on hillsides, and that shapes how a fire job runs here. Most apartments sit in multi-story buildings with shared HVAC stacks, shared attics, and shared walls, so smoke from one unit travels into three or four others before the fire department even arrives. We treat apartment fire damage restoration NEWPORT COAST California as a building-wide job from the first walkthrough, checking the units above, below, and beside the fire. The coastal air and marine layer keep humidity higher than inland Orange County, which slows drying after firefighting water and makes odor treatment more important, not less. We run dehumidifiers longer here than we would in a drier climate, and we verify moisture readings before we close up any wall. If you are searching for 24/7 apartment fire damage restoration in NEWPORT COAST, we answer the phone at any hour and dispatch a crew that knows these buildings.

Service Areas

Crystal Cove

Older building stock near the coast means paint may predate 1978, so we follow EPA Lead-Safe practices when we open walls and remove painted material.

Ocean Ridge

Multi-story buildings with shared HVAC stacks, where smoke from one unit often reaches the floors above and below before the fire is out.

Pelican Hill

Larger units with more square footage, which means longer soot removal and odor treatment times than a standard one-bedroom apartment.

Newport Coast Drive

A mix of residential and ground-floor commercial space, so a fire here can affect a leasing office or retail unit along with the apartments above.

The Summit

Hillside buildings where attic spaces are shared across units, so an attic fire has to be checked in every connected apartment, not just the one that burned.

Local Considerations

Coastal humidity and marine layer

Higher moisture in the air slows drying after firefighting water. We run dehumidifiers longer and verify moisture readings before closing up walls, which prevents mold from growing behind the new drywall.

Shared HVAC systems in multi-story buildings

Smoke gets pulled into the shared system and pushed into units that were never on fire. We check the HVAC closet and ductwork on every job and replace filters so the odor does not recirculate.

Hillside construction with shared attics

Attic fires can smolder into a neighboring unit through the shared roof deck. We check the full attic space, not just the unit that burned, before we call the fire out.

Older paint in pre-1978 buildings

Opening walls in older units can release lead dust. As an EPA Lead-Safe Certified Firm, we contain the work area and follow lead-safe practices on every job that requires it.

Kitchen Fire in a Pelican Hill Unit

Before

A grease fire burned the range hood and cabinets and pushed soot through the living room, hallway, and two closets. The unit smelled like smoke a week later, and the tenant was staying in a hotel while the landlord and renter's insurance argued over the scope.

After

We degreased the cabinets, HEPA vacuumed every surface, ran hydroxyl generators for 48 hours, and cleaned the ductwork. The unit passed a smell test at the door and in the closets, and both insurance carriers accepted the same scope. The tenant moved back in on day nine.

Maintenance & Follow-up

Replace the range hood filter every three months and wipe down the cabinet fronts above the stove monthly. If you smell smoke when the heat comes on, call us before the odor settles back into the drywall.

Before

An electrical fire burned inside a bedroom wall and charred the wiring run. The wall was hot to the touch, and the smoke odor had spread into the hallway and the unit next door. Nobody knew how far the damage went until the wall was opened.

After

We mapped the charred run with a thermal imaging camera, opened the wall, cleaned the cavity, and replaced the burned lumber and insulation. The drywall was repaired and painted with a smoke sealant base coat. The unit passed inspection on day 12 and the neighbor's odor complaint was resolved.

Maintenance & Follow-up

Have an electrician inspect the circuit that failed before you plug anything back into that wall. Keep the area around the panel clear and replace any outlet that feels warm to the touch.

Before

A bedroom fire soaked the mattress, bedding, and closet contents in smoke residue. The drywall was charred in one corner, and the smoke odor had reached the living room sofa. The renter did not know what her policy would cover.

After

We removed the soft goods that could not be saved, treated the room with hydroxyl generators, and cleaned the closet and dresser contents that could be restored. The drywall was repaired and painted. Her renter's insurance covered the personal property, and she moved back in on day seven.

Maintenance & Follow-up

Wash bedding and curtains monthly for the first three months, and keep the closet door open so air circulates. If the room smells like smoke after a humid day, call us for a follow-up odor check.

What Apartment Fire Cleanup Costs

Typical 2026 pricing for apartment fire cleanup in Newport Coast runs $2,800 to $12,000, with a contained kitchen fire landing near $5,500 and a fire that reached the attic or shared walls running higher. The number depends on square footage, how far smoke traveled, whether the HVAC system needs cleaning, and how much drywall has to come out. We give you a written scope before we start, and the price does not move unless the damage does. If you are looking for affordable apartment fire cleanup NEWPORT COAST near me, ask us about phasing the work so the urgent cleanup happens first.

Pricing Factors

Unit size

A studio or one-bedroom takes less time to clean than a three-bedroom with a den. Square footage drives labor hours, and labor is the largest line on the invoice. A 600-square-foot unit can be cleaned in half the time of a 1,400-square-foot unit.

Smoke travel distance

A fire contained to one room costs less than a fire that pushed smoke through the hallway, closets, and neighboring units. Every room the smoke reached has to be vacuumed, wiped, and treated for odor, which adds hours to the job.

HVAC contamination

If smoke got into the shared HVAC system, we have to clean the ductwork and replace filters, which adds cost. Skipping this step is why some units smell like smoke again the first time the heat comes on.

Water damage extent

Firefighting water that soaked into drywall, subfloor, and baseboards has to be extracted and dried before repairs can start. The more water, the longer the drying equipment runs, and the higher the invoice.

Structural repair scope

Replacing charred drywall, insulation, and lumber costs more than cleaning soot from a wall that is still intact. If the fire burned through a wall or into the attic, the repair scope grows and so does the price.

Insurance coverage

Most of the cleanup is covered by either the landlord's policy or the renter's policy, so your out-of-pocket cost is often the deductible. We document the unit so both carriers can process the claim without a second visit.

Investment Range

$2,800 - $12,000 depending on scope

Based on project scope

Value You Get

The price covers assessment, soot removal, water extraction, odor treatment, debris hauling, and structural repair in one scope. You are not paying three contractors separately, and you are not paying twice because the first crew missed the smoke in the HVAC system.

Frequently Asked Questions

Have questions? We have answers.

Call Us
How much does apartment fire cleanup cost in NEWPORT COAST California?

Most single-unit cleanups in Newport Coast run $2,800 to $12,000 in 2026, with a typical kitchen fire landing near $5,500. The number depends on square footage, how far smoke traveled, whether the HVAC system needs cleaning, and how much drywall has to come out. We give you a written scope before we start, so you know the number up front.

Who does apartment fire damage restoration near me in NEWPORT COAST?

We do. Our crew is based in the Newport Coast area and handles apartment fire damage restoration NEWPORT COAST California for renters, owners, and property managers. We are on call 24/7, and we carry the IICRC FSRT and WRT credentials that insurance adjusters look for when they review a claim. Call (833) 929-6186 and we will be at your building.

How long does apartment fire cleanup take in NEWPORT COAST?

A single-unit cleanup takes three to seven days for soot and water removal, plus 24 to 72 hours of odor treatment, plus one to three weeks for drywall and paint if the fire burned through a wall. A contained kitchen fire with no structural damage can be done in under a week. A fire that reached the attic or the shared walls takes longer.

Is apartment fire cleanup covered by insurance in California?

Yes, in most cases. Renters' policies cover your personal property and your loss of use, while the landlord's policy covers the building itself. We document the unit with photos and moisture readings so both claims have what they need. We work directly with adjusters and can bill the carrier for the covered portion of the cleanup.

Credentials and Reviews

Certifications

IICRC Fire and Smoke Restoration Technician (FSRT) by Institute of Inspection, Cleaning and Restoration Certification
IICRC Water Restoration Technician (WRT) and Applied Structural Drying (ASD) by Institute of Inspection, Cleaning and Restoration Certification
EPA Lead-Safe Certified Firm by U.S. Environmental Protection Agency
California Department of Public Health (CDPH) Mold Certification by California Department of Public Health
OSHA 10-Hour Construction Safety by Occupational Safety and Health Administration

Reviews

Google

Called at 1 a.m. after a kitchen fire in our Ocean Ridge apartment. A technician was at the door in about an hour, sealed the unit, and started soot removal that night. The smoke smell was gone after two days of odor treatment, and they handled the paperwork with our landlord's insurance.

Yelp

We manage several buildings along Newport Coast Drive and have used this crew on two fires. They document every unit, keep the tenants informed, and finish the drywall and paint so we are not hiring a separate contractor. The scope they write is the scope the adjuster approves.

BBB

An electrical fire burned inside our wall and we had no idea how far it spread. They used a thermal camera, opened the wall, cleaned the cavity, and rebuilt it so you cannot tell anything happened. Fair price, no surprises, and the hallway smoke smell was gone.

Related Services

Smoke Damage Restoration

Smoke travels farther than flames, and in a Newport Coast apartment it can reach units on the same HVAC stack. We seal the affected unit, run air scrubbers, and clean ductwork so the smell does not return when the heat comes on.

Smoke Damage Restoration

Fire Damage Clean Up

This is the hands-on work of removing charred material, wiping soot from every surface, and hauling debris out of the unit. We handle it for apartments in Crystal Cove and Pelican Hill, and we separate salvageable items from what has to go.

Fire Damage Clean Up

Emergency Fire Damage Restoration

When the fire department has just cleared the scene and water is still standing in your unit, every hour counts. We dispatch 24/7 to Newport Coast addresses and start extraction and soot stabilization the same night you call.

Emergency Fire Damage Restoration

Structural Repair After Fire

Charred studs, burned joists, and cracked drywall do not fix themselves. We replace lumber, drywall, and insulation, then prime and paint with a smoke sealant base coat so the repaired wall matches the rest of the unit.

Structural Repair After Fire

Odor Removal After Fire

Smoke odor bonds to drywall, insulation, and fabric, and it comes back when humidity rises. We use hydroxyl generators and charcoal activated filters to break the odor down, then verify with a walkthrough before we call the job done.

Odor Removal After Fire

Soot Removal

Soot etches glass and metal within hours and stains walls within days. We HEPA vacuum every surface, then wipe with dry sponges and chemical sponges to lift residue without smearing it deeper into the drywall.

Soot Removal

Smoke Remediation

Remediation goes past cleaning to sealing. We apply smoke sealant to walls and subfloor, replace HVAC filters, and clean the ductwork so smoke particles do not keep circulating through the unit after the visible soot is gone.

Smoke Remediation

Fire and Flood Restoration

Firefighting leaves hundreds of gallons of water in a unit, and that water wicks into drywall and flooring. We extract standing water, dry the structure with air movers and dehumidifiers, and treat for mold before it takes hold.

Fire and Flood Restoration

24 hour Fire Restoration

Fires do not wait for business hours, and neither do we. Our line is open around the clock, and we dispatch crews to Newport Coast buildings at night and on weekends so cleanup starts before soot sets.

24 hour Fire Restoration

Fire Damage Restoration Near Me

If you are searching for a local crew after a fire, we are based in the Newport Coast area and know these buildings. We can be at your door within 60 to 90 minutes of your call, day or night.

Fire Damage Restoration Near Me

Attic Fire Restoration

Attic fires in Newport Coast buildings spread through insulation and roof decking fast. We remove burned insulation, treat charred lumber, and check the shared attic space so the fire does not smolder into a neighboring unit.

Attic Fire Restoration

Kitchen Fire Cleanup

Kitchen fires leave grease-soaked soot that is harder to remove than ordinary smoke residue. We degrease cabinets, wipe appliances, and treat the range hood and ductwork, which is where kitchen smoke odor likes to hide.

Kitchen Fire Cleanup

Commercial Fire Restoration

If your Newport Coast building has ground-floor retail or a leasing office, we restore those spaces too. We work after hours to keep the disruption off your tenants and your customers, and we document everything for the commercial claim.

Commercial Fire Restoration

Electrical Fire Cleanup

Electrical fires burn inside walls, so the damage is often hidden behind drywall. We use a thermal imaging camera to find hot spots and charred wiring runs, then open the wall, clean the cavity, and repair it.

Electrical Fire Cleanup

Hoarding Cleanup After Fire

A fire in a cluttered unit burns hotter and spreads faster, and cleanup takes longer. We remove debris, sort salvageable items, and treat the unit for smoke odor once the space is clear enough to work in.

Hoarding Cleanup After Fire

Tenant Fire Damage Cleanup

Renters in Newport Coast need a crew that understands the split between their belongings and the landlord's building. We document both sides, work with both insurance policies, and keep you informed about when you can move back in.

Tenant Fire Damage Cleanup

Fire-Damaged Furniture Restoration

Solid wood furniture often survives a fire with soot and smoke odor rather than char. We clean, treat, and refinish pieces that are worth saving, and we tell you honestly when a piece is past the point of restoration.

Fire-Damaged Furniture Restoration

Fire and Smoke Damage Restoration

This combines the fire side and the smoke side of the job in one scope. We remove charred material, clean soot from every surface, treat odor, and rebuild the unit so you are not coordinating two separate contractors.

Fire and Smoke Damage Restoration

Bedroom Fire Damage Cleanup

Bedroom fires soak mattresses, bedding, and clothing in smoke residue, and those items hold odor longer than hard surfaces. We remove soft goods, treat the room, and clean the closet and dresser contents that can be saved.

Bedroom Fire Damage Cleanup

Call Now for Apartment Fire Cleanup in NEWPORT COAST, California

We are on call 24/7 and dispatch crews to Newport Coast buildings within 60 to 90 minutes. Our technicians hold IICRC FSRT and WRT credentials, and we document every unit for your insurance claim. Call (833) 929-6186 and we will start the cleanup tonight.